High quality reinforcement for any mining environment
Engineerred Fiberglass Reinforced Plastic (FRP) rock bolts are superior to steel in many ways.
Over three times the embedment strength of steel.
Everlast rock bolts prevent failures during and after installation.
Everlast Rock Bolts are a fraction the weight of steel.
Safer and more flexible and easier to install.
Better Value, More Savings
Less than steel assembly, easier on equipment and faster to install.
Save time and money
Everlast Bolt™ and Everlast Bar™. The best quality FRP construction products on the market.
Non-corrosive bolts, washers, nuts and mesh.
- Easy to cut
- No steel shrapnel during blasting
- Adaptable to existing steel systems
- Easy to use nut and bar system
- Ligtweight. 25% weight of steel
- All components supplied in 1 package
- 100% Non-corrosive and alkaline resistant
- Complies with infrastructure and mining test requirements
- Non-magnetic and non-conductive
Nominal Diameter: .875 Grade 40 Steel Rebar - .875" BMM Everlast Bolt (Equal to steel)
Weight: 2.04 lbs/ft Grade 40 Steel Rebar - .54 lbs/ft BMM Everlast Bolt (3.7 x Less with Everlast)
Tensile Strength: 40 KSI Grade 40 Steel Rebar - 131 KSI BMM Everlast Bolt (3.2 x More with Everlast)
Corrosion Resistance: 45-200 um/year Grade 40 Steel Rebar - 0 um/year BMM Everlast Bolt (45 x Less with Everlast)
*Test results based on ASTM-D638-10 and D3916-08.
**Data reflects average results of tests conducted under standard procedures and are subject to variation.
Results should not be used for specification purposes.
Tensile Modulus of Elasticity = 8,721 KSI or 60,129 MPa
Perpendicular Single Shear = 17.3 KSI or 118 MPa
Bond Strength = 100 KSI or 689 MPa
Elongation After Break = 11%
- Hard Rock Mining
- Coal Mining
- Ground Stabilization
- Civil Construction
- Specialty Applications
- Temporary and Permanent Ground Support